SEARCH FOR TOOL
SOLUTIONS FOR
TYPE OF PRODUCT
SOLUTION FOR
TYPE OF PRODUCT
  • DISPLAYS
  • DIAGNOSIS
  • MEASUREMENTS
  • EMISSION ANALYSIS
  • REMOTE DIAGNOSIS
  • A/C SYSTEM RECHARGING
  • HEADLIGHT ANALYSIS
  • SANITATION
FEATURES
SOFTWARE


ADAS

TEXA radar and camera calibration solutions

Specialists in the control of ADAS

Designed to guarantee safety and comfort while driving, the ADAS (Advanced Driver Assistance Systems) are ever more common in latest generation vehicles.
Cameras, radars, LIDARs and sensors must be recalibrated when replaced, but even when actions that affect them are required, such as: replacing the windscreen and bumper, repairing the suspensions, aligning the wheels, changing the tyres, replacing the engine control unit, etc.
Knowing how to intervene in this field is strategical to keep pace with the times and be able to offer customers first class assistance.
TEXA’s solutions allow performing static and dynamic calibrations and resetting the ADAS correctly, guaranteeing the safety of the drivers and of who carries out the diagnosis and calibrations.
The IDC5 software guides mechanics step-by-step throughout all the phases, thanks to the helps sheets specifically developed for each vehicle, offering a very wide CAR and TRUCK coverage, at least 30% higher compared to other solutions on the market.
Furthermore, to learn all the secrets of ADAS, there are two specialised courses available, D9C and D9T, developed by TEXAEDU.

 

 

I AM INTERESTED

PLEASE CONTACT ME
FOR A DEMONSTRATION!

 

 

 

 

A complete 360-degree offer impossible to do without

TEXA helps repair professionals operate on these sophisticated active safety devices, with a complete multi-brand offer that includes:

RCCS 3 (Radar and Camera Calibration System 3) available in two versions
A large availability of specific panels and accessories
ADAS TRUCK kit
Specialised training

 

 

 



RCCS 3

two versions for a top-of-the-range solution

The unit, designed and engineered by TEXA, is available in two versions: RCCS 3 with Monitor and RCCS 3 with Panels.

Both include maximum constructive technology and exceptional components.
RCCS 3 with Monitor is the top product in terms of performance and speed as it uses the digital representation of the panels, whereas RCCS 3 with Panels is intended to guest physical targets.

TEXA’s solutions guarantee vast handling possibilities through a simple, quick, precise adjustment and can be used both with the toe and thrust axis check kit and in the optical alignment mode.
Two versions, two ways to approach work, but a unique result: maximum safety for drivers and for who performs the calibrations, made possible by the high practicality and precision of RCCS 3.

 

 

RCCS 3 with Monitor


RCCS 3 with Panels


 

 



RCCS 3 with Monitor

the digital innovation for calibrating ADAS

 



RCCS 3 with Monitor
is TEXA’s solution for setting radars, LIDARs, cameras and sensors through the digital representation of the panels.


In fact, it is equipped with a 75-inch HD screen, 4K definition, which always offers an optimal display, meeting the 1:1 proportion ratio in line with the specifications of every manufacturer.


Furthermore, it is important to highlight that it does not deform nor resize the images.
This way workshops are sure to operate in the most proper and safe way, without risking to alter the vehicle’s behaviour on the road.


RCCS 3 communicates with the IDC5 software and guides the mechanic, step-by-step, to the quick and automatic identification of the vehicle. The panel is selected and set in the monitor, with no possibility of error.


Thanks to continuous software updates that each time offer new vehicles and eventually new panels, and to the essential help sheets edited per make and model, users are sure to complete any operation with maximum precision and to the highest standards, relying on an extraordinary coverage.


Furthermore, the digitalisation of the panels allows clearing considerable space in the workshop that would otherwise be occupied by multiple physical panels.


 

 

 

 

 

1:1 PROPORTION RATIO

in line with the specifications
of every manufacturer

ROBUST

but easy
to move and adjust

EASY TO USE

thanks to the digitalisation
of the panels

 

 

 

 

 

 

Intelligence and safety
thanks to the Mini “on-board” PC

 


An actual Mini PC built into the unit, installed in the version RCCS 3 with Monitor, guarantees the use of an intelligent system that synchronises the ICD5 software and the TEXA unit perfectly.
The images of the panels are transmitted and positioned automatically, based on the vehicle selection made. They are displayed through a linear, safe and quick process.

 

 

 

 

 

 

 

Precise, simple and quick
adjustments and movements

 

RCCS 3 is made up by a very robust main support, which height can be adjusted thanks to its electrical operation. Using practical knobs, it can be easily tilted to the side and forward.
A handhwheel and a laser level allow also performing millimetric side movements. On top of the unit there is another laser level, very useful for finding the centre of the vehicle simply pointing it onto the front logo. The horizontal adjustment bar is equipped with two distance measurers and a reflecting plate, the latter with a central laser for the front radar’s aiming. RCCS 3 is easy to move within the workshop thanks to its oversized pivoting wheels.

This technological equipment allows positioning RCCS 3 and aligning it correctly with respect to the vehicle and to the ground easily, with absolute precision and in complete safety.

 

Upward moving

Side shifting
only in the version with Monitor

Forward tilting
only in the version with Monitor
Side tilting

 

 

 

 

 

 

Very performing
even with the optical alignment

 

Other than the version with toe and thrust axis check, RCCS 3 is also available in the highly performing optical alignment mode.
This configuration uses wheel clamps and was designed to complete all the operations on radars and cameras in a quick and precise way.

 

 

 
In order to align the vehicle, two practical aiming bands are used, onto which the lasers of the two distance measurers on the unit’s main axis are addressed.

Latest generation laser technology
The distance measurers provided by TEXA are the ideal solution to meet the most severe professional and precision criteria requested by workshops worldwide.

 

 

 

 

 

 

With the IDC5 software
all the information to support all operations

 

TEXA’s solutions must be used in combination with the IDC5 diagnostic software that allows completing any operation quickly.
In fact, the application provides specific diagnostic help sections for each make/model, with the instructions (such as panel height, distance from the vehicle, alignment, etc.) for the correct positioning of the unit, guiding you step-by-step throughout the procedures.
Furthermore, at the end of the calibration, you can print a report to hand over to the customer with the evidence of the operations carried out.

 

 

 

 

 

 

 

 

 

 

 

RCCS 3 with Panels

the version with physical targets

 

As already mentioned, RCCS 3 can also be purchased in an “entry level” configuration that has the same exclusive features of the top-of-the-range version but requires using physical panels in place of the monitor. This allows using the TEXA panels and accessories dedicated to calibration to complete any operation with maximum customer satisfaction.

 

 

 

 

 

 

 

 

 

 

 

 

A large range of accessories

for a complete solution

TEXA’s ADAS solutions can be used in combination with other optional devices to work in depth on other electronic driver assistance systems, among which:




ACS (ALL-AROUND CALIBRATION SYSTEM)


ACS allows calibrating 360° cameras and Dopplers* for VAG Group (AUDI, SEAT, SKODA, VOLKSWAGEN, LAMBORGHINI) vechicles. TEXA’s solution is featured by a great practicality being equipped with wheels that allow moving quickly within the workshop.
IR CALIBRATION TARGET AND NIGHT VISION SYSTEM


They are two very useful accessories as they allow calibrating the infrared camera, in a short time and with maximum precision, for the Mercedes and VAG Group vehicles in which it is installed.
It is an essential device from the point of view of road safety, which helps drivers detect in advance people or animals in the dark.
Positioned in front of the vehicle, the IR Calibration Target and Night Vision System simulate the presence of a warm body.
 
 
BLIND SPOT RADAR REFLECTOR


It is an essential device for calibrating the ultrasonic radars installed in vehicles of the makes HYUNDAI, HONDA, KIA, LEXUS, MAZDA, MITSUBISHI, SUBARU, TOYOTA. It is made up by a metal reflector cone, a laser and a goniometer jig to help the technician position the pyramid cone correctly. It can be used both for the front radars and for the side and rear radars.
DOPPLER SIMULATOR


This accessory also is needed to calibrate the blind spot radar. However, in this case it is an active simulator that responds to the frequency generated by the rear radar in MAZDA and VAG Group vehicles.
360° MATS FOR TOYOTA, LEXUS, SCION AND SUZUKI


A modular kit that allows calibrating the 360° vision system in TOYOTA, LEXUS, SCION and SUZUKI vehicles equipped with this technology.

 

 

 

 

Calibration panels and accessories

To calibrate different ADAS systems, TEXA’s solution uses specific panels and accessories covering makes and models of many manufacturers.

Check the complete and always up-to-date coverage:

www.texa.com/diagnostic-coverage

 

 

 

 

 

 

 

 

An ad-hoc system

for the TRUCK environment


The importance of ADAS for the safety of people is even clearer when applied to the world of heavy-duty vehicles. In fact, it is essential that trucks comply with certain behaviours when on the road, such as the distance from the preceding vehicle, the speed, how to overtake and therefore changing lanes, the capability of braking safely, etc.   

Therefore, even some truck and commercial vehicle makes need appropriate equipment to properly set the multifunction cameras, radars and sensors that control essential systems such as: the Adaptive Cruise Control, the Lane Departure Warning System, the Forward Collision Warning, the Advanced Emergency Braking System.

TEXA offers an adjustment system that includes a measuring bar, panels divided by make – dedicated to cameras and laser devices – that are essential for the correct alignment and calibration of WABCO, TRW and TRW/Knorr radars.
The TRUCK ADAS Kit also includes a set of clamps with laser pointers, the laser needed to adjust the Adaptive Cruise Control.
The TRUCK IDC5 software remains essential as it guides the operator step-by-step even through operations on vehicles that require a dynamic calibration with the on-road adaptation procedure.



 

 

Calibration panels and accessories

To calibrate different ADAS systems, TEXA’s solution uses specific panels and accessories covering makes and models of many manufacturers.

Check the complete and always up-to-date coverage:

www.texa.com/diagnostic-coverage